We'll explain later what the slip solution and tack solutions are used for and how to use them, but for now, let's get them ready to go!
Tack Solution
In your application kit, find, your tack solution spray bottle, and tack solution concentrate.
Pour tack solution concentrate into the bottle and mix with water. The ratio of tack solution concentrate to water should be 1 to 5. That is 1 part tack solution concentrate to 5 parts water.
If you can use distilled water, do, if you don't have access to distilled water then tap water is suitable.
Slip Solution
Find the slip solution spray bottle and slip solution concentrate. In the bottle, pour half a cap full of slip solution concentrate, it should be 4 drops or so. Top the rest up with water or distilled water and shake well.
You can always top up with water or more slip concentrate as required.
Lesson Summary
Here is a summary of preparing the slip and tack solutions:
To prepare the tack solution:
Find the tack solution concentrate and spray bottle in your application kit. Pour the tack solution concentrate into the bottle.
Mix the concentrate with water at a ratio of 1 part concentrate to 5 parts water. Use distilled water if available, if not, tap water is suitable.
To prepare the slip solution: Find the slip solution concentrate and spray bottle in your kit.
In the bottle, pour half a cap full of slip solution concentrate (approximately 4 drops).
Top up the bottle with water or distilled water. Shake well to mix the contents. You can add more water or slip concentrate based on your needs.
