DIY PPF Academy
Lesson 19 - Selecting your tack points
During the installation process of a wing, it is crucial to select tack points strategically for proper alignment and adhesion. To effectively tack the wing:Identify areas that need significant stretching,...
Lesson 19 - Selecting your tack points
During the installation process of a wing, it is crucial to select tack points strategically for proper alignment and adhesion. To effectively tack the wing:Identify areas that need significant stretching,...
Lesson 20 - Squeegeeing down the panel
After ensuring the badge's position and tacking the corners, the body panel's body can now be squeegeed down methodically. It's best to work in sections and consider the body line...
Lesson 20 - Squeegeeing down the panel
After ensuring the badge's position and tacking the corners, the body panel's body can now be squeegeed down methodically. It's best to work in sections and consider the body line...
Lesson 21 - Dealing with fingers
When dealing with excess film causing fingers, follow these steps:Begin by hitting the affected area with tack solution to start off.Split the fingers into smaller, manageable sections to spread the...
Lesson 21 - Dealing with fingers
When dealing with excess film causing fingers, follow these steps:Begin by hitting the affected area with tack solution to start off.Split the fingers into smaller, manageable sections to spread the...
Lesson 22 - Wrapping the edges
After leaving the bonnet edges to dry off for some time, they naturally have fallen into place and are sticky meaning they will wrap around.Attempting to tuck the edges the...
Lesson 22 - Wrapping the edges
After leaving the bonnet edges to dry off for some time, they naturally have fallen into place and are sticky meaning they will wrap around.Attempting to tuck the edges the...
Lesson 23 - Sealing the edges
After wrapping and drying the edges, the next step involves using a heat gun to ensure the edges are properly sealed. Here are the key points:Wrap the edges with a...
Lesson 23 - Sealing the edges
After wrapping and drying the edges, the next step involves using a heat gun to ensure the edges are properly sealed. Here are the key points:Wrap the edges with a...
Lesson 24 - Dealing with bubbles
It is common to find pockets of air or liquid in a finished project, which will naturally dissipate over time, especially after being exposed to sunlight over a couple of...
Lesson 24 - Dealing with bubbles
It is common to find pockets of air or liquid in a finished project, which will naturally dissipate over time, especially after being exposed to sunlight over a couple of...
Our PPF rivals the best in the industry...
Technical Specifications
Professional-Grade Film Properties:
- Total thickness: 190µm
- TPU thickness: 150µm
- Self-Healing: Activated at 30°C
- UV Protection: Advanced anti-yellowing technology
- Surface Energy: Optimized for professional installation
- Adhesive Type: Pressure-sensitive acrylic with positioning properties
- Warranty: 5-year comprehensive coverage
